Symington corset pattern 1907-07 experiment

Victorian Black and Blue-8

 

When, earlier on this year, the scans of Symington corset patterns were released, (by Leicester County council, link to the patterns, etc: Leicestershire symington patterns), a lot of corsetmakers  stormed the site and bought the images they wanted to use as an experiment in pattern-making. Well, I was one of the horde who grabbed an image (or two…) but it was only recently that I had time enough to have a go at one of the patterns.

I chose 2 complex patterns and up till the last moment I couldn’t decide on which one to make first – but  in the end the decision fell on one with a lot of gores. I know, a masochistic choice, but well… I just couldn’t resist it, as the ‘gore within a gore’ concept worked for me on a variety of levels –  historically accurate and yet with styling  that would not look amiss in a modern or steampunk corset.

So ‘Gore Galore Corset’ it was – and it turned out be be even more gore-tastic than I had imagined….

IMG_0286

But,  let us start at the beginning.

 

The moment I measured the printed out pattern, I knew there would be serious issues with the fit – it just wasn’t very curvy! There were just a few inches of difference between the  hip, waist, and bust, and my bod calls for more than just a few. Still, I worked out (read: husband  did the calculations) how much the  pattern has to be enlarged, and blew it up in the local photocopying place.

IMG_0287

Then, I took the sheet, components and lunch and drove over to Sew Curvy for our usual Stitch and Bitch session – the corset was to be constructed there –  good company and nice space make it easy for me to focus, and having an accomplished corsetiere on hand to help with the fitting can only help… 🙂

The work could then begin.

IMG_0289

tracing the seam lines on the blown up copy

 

IMG_0288

calico on the pattern and could trace the pieces next…

IMG_0290

Pieces traced

IMG_0291

and pieces cut out….

 

At that point I was cleverly distracted by Julia who dug out 2 lovely antique corsets and I stopped to drool over  them… A teaser here, no doubt Julia will put more info and pictures of them on the Sew Curvy blog at some point…

IMG_0295

 

Then it was back to work – I wanted to assemble the mock up before lunch…

IMG_0301

The pieces assembled….. outside view

IMG_0302

 

and inside, below…

IMG_0303

 

IMG_0304

 

The moment of truth! How does it look on the body..?

IMG_0305

 

Pretty straight – as expected to be  honest.  As the proportions, length etc worked, I just needed an inch more reduction at the waist – and  to add a few inches at the hip and bust to accommodate my curves…

IMG_0307

And the easiest way to do that was just to cut inside the gores and use bits of calico to cover the areas that needed more expansion… and a bit more boning in front for support…

 

IMG_0308   The hip spring already looks much better, (and feels more comfy too)

 Then it was lunch time!

IMG_0310

well, we had soup first…..

After lunch I amended the pattern to accommodate the changes – all that needed to be done was to enlarge the inside gores….  and since the incisions were sort of already there, I decided to let them remain split – and just get another gore in…. A gore within a gore within a gore! A bit mad, but it just seemed to work better than simply making the inside gore bigger – and it resulted in a much more interesting look too…..

IMG_0311

Corset pieces cut out in black and blue sateen

Alas, it also meant I had 12 gores to sew in…. ouch….

IMG_0314

seam allowances pressed and ready for assembly

but with help of coffee I persevered…

IMG_0318

the corset will be boned with internal boning – but since back looked a bit boring in comparison with the front, I decided to make a casting for double bones in contrasting fabric there to balance the design

The rest of the evening was spent flossing the gores…..

IMG_0320

 

And next morning saw me with the gores flossed (is it only me, or does that sound a bit weird? ), and I was ready for some boning. (Seriously, take that sentence out of context and it sounds damned indecent! Corsetry nomenclature joys…)

IMG_0327

 

I marked the channels as close to the original as possible, and added a few more to support my boobage a bit better too…) The tape was applied over a waist stay.

IMG_0330

 

and done!

IMG_0331

It was time to try it on – if anything needs changing, there is still some scope for reshaping things, if needs be, before the lining comes in and covers all the inside…

IMG_0353

verdict – not too bad!

IMG_0339

a tiny bit too loose at the back hip, but easy to amend. very comfortable too!

At that stage I  said goodbye to Julia and Sew Curvy studio and drove back home, where I finished the corset the next day – black cotton lining was added and the bones were flossed in black. Then it was binding time and it was done!  If needs be, suspenders can be added at the front center and sides, but that can be done later once I decide whether to use it as an undergarment – or a modern top layer corset…

IMG_0554

 

As it turned out, it was over a month later that we were able to get any decent photos – and  surprise, surprise, my overindulgence in MMA and other martial activities  at the club meant that I lost some inches… The corset still fitted, but was a bit on a loose side. 😦
Even with the corset a tad too big, we got to shoot it and ended up with some interesting images.

First we shot in in the historical style – with black lawn chemise and drawers, with a matching blue ribbon.

Victorian Black and Blue-7

Victorian Black and Blue-11

Victorian Black and Blue-14

Victorian Black and Blue-17

 

And later on in the evening,  on the way back from the movies, I  changed into leggings, black top and a wig – and we shot it with a cyber punk/comic/ Tron convention  in mind – the results below….

 

Black and Blue SciFiAngel Underlight Neon

 

Black and Blue SciFiAngel Neon-2

Black and Blue SciFiAngel Underlight-4

Black and Blue SciFiAngel Underlight-5

Black and Blue SciFiAngel Underlight-9

Black and Blue SciFiAngel Underlight-8

 

As you can see, it turned out to be a pretty versatile piece –  just a shame it is a tad too big now….   And as it is a bit too big, it has already been sold to a friend  who plans to use it for some steampunk events – so it is bound to lead an interesting life….

But I am not saying goodbye to the pattern per se – indeed I liked the gores so much, I have now purchased black and yellow lacquered leather – it will be made into a Hornet Corset:-)

 

 

 

 

1895 Winter Project

Iz and Lucas in the Snow-1a

I have  done a lot of earlier Victorian (1876-86), but i have not really ventured into the 90ties ( though I did make a 1895 Ripple jacket for my Christmas outfit last year), so the Belle Epoche ideas had been brewing awhile here…

and then, a few moths ago, I saw this on Pinterest

1c4054aa823914d3d9726cf937b18188

I mean –  huge skirt ridiculous lapels, mega-sleeves, a very ugly hat – how can you not love it!? I immediately pinned it onto my 1890ties board and started planning…

It was a longer project i planned to do more or less over the Christmas break here – I don’t celebrate it, but many of my clients do, so there is a bit of a free time to carve for my own projects there:-)  I wanted to make  as many bits as I could in the gaps before the commissions and hopefully shoot it with a wintry landscape, should we be so lucky as to get any snow here.

starting ith the foundations..

Corset.

I already had a corset cut to a Symingotn pattern ( patterned by Cathy Hay) – I made it for my wedding 3 years ago, when I was just starting my corsetry adventure, and so it doesn’t fit particularly well (  the back laces form () at the back, never a good sign.. ) Still, it survived 3 years of extensive use, and it looks nice and is very , very comfy…

Late Victorian Wear-31

my old ‘wedding’ corset in coutil and silk

Since I now had an excuse to make a new one, i set down to work. I redrafted the same patter to fit me better, and this time made it a one layer affair in a lovely  mink coutil from Sew Curvy. I also decided on external bone channels – and you can see the details on construction in the little video I put together – Here.

The blue flossing and external tape worked well with the mink colour and I put some antique lace at the top too.

It fits nicely and is comfy, and once it is properly seasoned ( worn for a bit, so that it adjusts to my body) i bet it will close in the back. Both corsets are 27″ waist.

Late Victorian Wear-37

Late Victorian Wear-43

IMG_20141226_133737

The petticoat was easy – I used my old antique one:-)

Late Victorian Wear-26

To get the proper width of the hem, an underskirt was often worn too –  there are a few existing ones , and whereas some are made in cotton, there are a few made in silks, with rather nice lace – a very elegant affairs!

I  hunted out some nice lace on etsy and used leftover silk from my Regency gown

I used up 12 metres of that lace… all gathered and sewed in two tiers – to the hem and to the flounce

IMG_20141221_184843

Late Victorian Wear-25

The skirt was next. I used a Truly Victorian Pattern for the Ripple skirt and it worked a treat! I made mine in boucle wool, with stiff cotton lining.

Late Victorian Wear-14

IMG_20141229_201307

 The blouse – well, in this instance i ran out of time a bit and used a blouse I found on ebay, from Cotton Lane. Thy make pretty neat shirtwaists, that are not too different in construction from the proper stuff – and as I dislike sewing shirts etc, I simply plan to alter this one – I will remove the sleeves, cut out the pin tucked panel and the cuffs and sew them onto a proper, leg of mutton style sleeves in the same cotton. I will need to re-insert the collar too, to fit my neck better, but altogether I think it should pass muster – will update this post once it is done ( february, as want to wear it for the next market! )

 And then it was time to think about the coat….

 I wanted to make it in green wool and line with cotton. When I went wool shopping i was irrevocably drawn to the wool I used for mu 1876 February dress – lovely , napped fabric, soft and warm. I couldn’t say no…

 The lining was a rather pricey cotton flanelett – light, but soft, with a slight nap, to keep me war,

 Other ingredients included  rabbit fur,  linen interlining for the lapels and collar, tape for channels and lovely buttons made by Gina B.

   Looking at many original coats and patterns from the era, it is easy to notice that the coats dould me made either with bodice and skirts cut separately or together. I decided on the former – and adapted a pattern for the skirts from one of the coats shown in this book – 59 Authentic turn of the century patterns 

The bodice getting ready… I adapted a pattern of my old Victorian bodice and played with a mock up untill I had the correct shape of the lapels… took a few goes…

IMG_20150116_181604

IMG_20150117_144507

The ‘sleeves of doom’ were quite a challenge. I found  a pattern for the sleeves in the same book and played with them – they consisted of a normal sleeve, lined, and a puff . the sleeves are cut on the bias, to achieve the fitted forearm, and the puff is interlined and stiffened with layers of net…

IMG_20150116_225516

the undersleeve

IMG_20150117_153213

the puff with net being attached

 But the net and pleating wasn’t enough to achieve the desired look. shoulder supports were needed.

 I found a few pictures of them, and in the end settled on the wire  and tape ones. they go inside the puff, and are tapes are sewn onto the undersleeve.

IMG_20150116_212214

I must admit that try as I might, the pleated effect seen on the original escaped me ( I almost got there with cartridge pleating but realised in the end  that i would have to have more fabric – and a different shoulder support, possibly with the wired running in the other direction, so that the pleats fill in between… just a theory.

 Still the sleeves did work out quite well…

   time to attach the skirt to the bodice… the bodice was boned on every seam and has a waiststay as well.

IMG_20150118_131029

planning the waistsay

IMG_20150117_231433

Thebuttons were next – they are decorative items, as the coat closed with hooks and eyes under the fur trim:-)

The hat was simply an adapted hat  from my 1876 frock – i simply drew the line at  making an ugly hat and decided to temporarily re-arrange an existing one – and since the brim was wired, it was easy to shape it differently, add feathers and a bow:-)

On the day we used a new backdrop for some of the pictures ( no snow here, alas) for a  cheesy Victorian postcard look, with the props being a few things we picked up on ebay – antique sledge and skates 🙂

sledge

 it was time to get dressed – and  I realised a bit of a mistake as soon as i put the coat on – the skirts were voluminous and heavy, squashing the shape of the  Ripple skirt, and dragging on the floor 😦 so that’s another thing I will need to sort out before a proper outing – cutting the hem short and probably adding a bit more stiffening to it too, to help it flare out.

 Apart from that I am very happy how it all turned out – and hope we will see some proper snow at some point to take better pictures!

  as it is – the results below:-)


Late Victorian Wear-2 Late Victorian Wear-2--4

Late Victorian Wear-4

Late Victorian Wear-20

Late Victorian Wear-19 Late Victorian Wear-17

  The cost.. ouch…

 corset – materials and labour – approximately £300,

 underskirt  – lace – £90, silk £30, labour £90 – £210

 ripple skirt – fabrics  – £50, labour – £150 – £200

 coat – fabrics and notions – £100, labour £300

 cheap blouse – £35  😉

 total – approx £1000….. plus the hat…

 Altogether  it was not the most expensive but not the cheapest set either – but it is comfortable, stylish  and more or less practical ( once you get used to the enormous sleeves) so I will be wearing it quite a lot for the markets etc, I think:-)

  And yes, I do love the sleeves… Power dressing!!!! 🙂 hope you like it too 🙂

 usual credits – Dressmaking – Prior Attire

 photography – Pitcheresque Imagery

 corsetry supplies – Sew Curvy

 Buttons – Gina B Silkworks, 

 Wool – Bernie the Bolt

 cotton lining, notions – Tudor Rose Patchwork

 Fur – GH Leathers